Features:
1. Stronger anti-interference,Further distances
2. Extra Satellite is not needed,more convenient.
3. AR8000 For DSMX 2.4 GHz 8 Channel Receiver is a high quality aftermarket parts.
Specification:
Model: 732499
Color: Black
Material: Plastic
Voltage: 3.5V-9.6V
Channel: 8
Modulation: For DSMX
Frequency : 2.4GHz
Product Model: AR8000
FCC: BRWDASRX10
Dimension: 32.3 x 30 x 11.4 mm
Fitments (For the reference):
Used for aircraft with capable transmitters JR,Spektrum Dx7s,Dx8,Dx9,Dx18
Methods Of Frequency Pairs:
1. the frequency plug is inserted into the receiver BIND channel, and the battery
(or switched on power adjustment) is inserted into any other unused channel,
where the LED lights of the internal receiver and the external receiver are flashing.
(or switched on power adjustment) is inserted into any other unused channel,
where the LED lights of the internal receiver and the external receiver are flashing.
2. transmitter (for the protection of state, state control of the general throttle hit the lowest),
pressing the remote control on the key (light), and open the transmitter power
(preset type full channel protection function set here)
pressing the remote control on the key (light), and open the transmitter power
(preset type full channel protection function set here)
3. at this time, the internal receiver LED light from fast flashing to slow flashing,
a few seconds, the receiver and external receiver LED light to the usual bright,
LED lights are often bright when the completion of the frequency
a few seconds, the receiver and external receiver LED light to the usual bright,
LED lights are often bright when the completion of the frequency
4. remove the BIND interface to the code line, re power, the normal operation of each channel.
5. The new receiver only needs to frequency one, and when the frequency is successful,
the frequency line is removed when used.
the frequency line is removed when used.
Note:
1. We provide clear pictures, measurements where possible.
Please check as much as possible to make sure the item is the one that you need.
Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3. There are no instructions included in this kit.Professional Installation Is Highly Recommended.
4. Please Compare The Receiver With Your Original One Before Purchasing.
Package Included:
1 X AR8000 2.4GHz For DSMX 8 Channel Receiver
1 X Plug Bind
AR8000 2.4GHz DSMX 8 Channel Receiver Support For Spektrum Transmitter DX7s DX8 DX9Buy Now